A well-constructed chimney is integral to the overall safety and functionality of a building, requiring careful planning, precise execution, and adherence to industry standards and regulations. Leveraging decades of experience and expertise, Clifford’s Fireplaces Ltd. has solidified its position as a premier provider of chimney construction services in Ireland. With a commitment to excellence and meticulous attention to detail, the company employs cutting-edge techniques and high-quality materials to create durable and efficient chimney systems that meet the diverse needs of their clientele, setting the standard for superior craftsmanship in the industry.
Single Wall Flue Pipe
Single wall straight lengths available in both 5″ and 6″ diameters and in various lengths, and bends with varying angles and cleaning door options which can be easily combined to achieve the desired flue run.
Twin to Single Wall Adapter
The twin to single wall adapter is used to join single wall flue pipe or an appliance to a twin wall system. It is available in 2 sizes to join with 5″ or 6″ single wall pipe or appliance with a 5″ or 6″ flue.
Twin Wall 45° Bend
Also available in 15° & 30° bends these components are used when a change in direction of a flue run is required they can be easily rotated where required to achieve the result.
Twin Wall 45° with Tee
This component is used when a change in direction in the flue run is required, it can be used with a 45° degree bend when a change from horizontal to vertical is required in the flue run. This component minimises the resistance to the flow of the flue gas because of the angle created with the vertical axis. It comes with a tee cap which provides access for inspection and cleaning. In addition the cap has a drain off connection.
Twin Wall 90° with Tee
This component is used when a change in direction from horizontal to vertical is required in the flue run. This comes with a tee cap which provides access for inspection and cleaning. In addition the cap has a drain off connection.
Twin Wall Adjustable Length
This component is used to ensure any variation in length is achievable as outlined below. The adjustable lengths are non load bearing and telescopic and a wall bracket must be used on the component directly above the chimney run. Extra insulation is included so that additional length can be filled.
Twin Wall Base Support
The base wall support is used externally and its function is to create a base support for the flue system. The base wall support needs to be fixed securely to provide support for the flue run.
Twin Wall Bracket
The function of the wall bracket is to act as lateral support for the flue run. The wall support maintains the required minimum distance of 50mm between the flue run and the wall. Also available as an adjustable bracket.
Twin Wall Cravat
The Cravat is fitted to the flue run just after the installation passes through the roof and is fitted to the flue run just above the roof flashing using sealant and the nuts / bolts provided to give a weatherproof seal.
Twin Wall Flue Pipe
Twin Wall Flue Pipe is available in a range of lengths which can be easily combined to achieve the required height for the installation. Each joint is firmly secured using the locking bands supplied. All lengths must be installed with the crimped end facing downwards.
Twin Wall Locking Band
The locking band comes with every connection that has a male end. This ensures that every joint is strong, secure and weatherproof. The locking band is secured using a standard screwdriver.
Twin Wall Raincap
The Raincap or Weathering Cap is fitted to the top of the chimney in exposed areas and is used to ensure rain or snow cannot gain access to the chimney while ensuring the exit of the flue gases is not impeded. All rain caps are also fitted with an anti bird mesh.
Twin Wall Roof Flashing
The roof flashing is used externally when the installation passes through the roof and is used to give a weatherproof seal.